Laser Pilot MTX HS

MTX-HS includes a high precision slides(s). The slide is mounted on the robot or machine and carries the weld head and sensor. The MTX-HS controls the slide position, based on the seam position, to keep the weld head located correctly over the seam. In this case only a simple interface is required to the robot or machine to provide start/stop, error and tracking
signals.

The Laser Pilot control system uses a single processing board. All software required for system operation resides on a flash memory device. Programming the Laser Pilot is made simple by a Windows based software package called Laser Pilot Tools.

Laser Pilot Tools is provided on a CD and is used on a lap top or PC connected to the Laser Pilot system with a serial lead. After system installation and when programming is complete, settings are saved onto the processing board and Laser Pilot Tools is disconnected. This protects settings during system operation.

Users of Meta systems for laser welding

• Jefferson Blanking, USA
• Seat, Spain
• Olympic Laser Processing, USA
• Solbank, Spain
• Ohio Welded Blank, USA
• FASA, Spain
• Honda, USA
• Renault, Douai, France
• Solblank, Mexico
• Renault, Sandouville, France
• Shiloh de Mexico, Mexico
• BAeSystems, UK
• Solblank, Brazil
• Ekostahl, Germany